Installing ArchLinux in UEFI native mode is surprisingly simple. Here are the steps I followed.

Quoting Wikipedia: UEFI is a software interface between an operating system and platform firmware. UEFI is meant to replace the Basic Input/Output System (BIOS) firmware interface, originally present in all IBM PC-compatible personal computers.

This post describe a setup without GRUB:

  • The Linux kernel is directly loaded by firmware
  • In case of dual boot, the OS selection is done from the UEFI user interface

Motherboard configuration

The Compatibility Support Module (CSM) can be disabled as the resulting system will boot natively into UEFI.

SecureBoot must allow unsigned kernel to boot. On my system (a Maximus VI Gene), the setting is called OS Type, and I set i to Other OS.

Partitionning / file systems

The partition table must be a GUID Partition Table (GPT), instead of a msdos legacy partition table.

The program and configuration files necessary to start the system must reside in a dedicated partition, called the EFI System partition (ESP). The ESP must have partition type EFI system (C12A7328-F81F-11D2-BA4B-00A0C93EC93B) set in the GPT. It must be FAT formatted yet the variant is up to you: FAT12/16/32.

To simplify the partition scheme, i’m also using the ESP for /boot. So 512M is good. The rest of the partitioning is up to you. Using fdisk, which now supports GPT:

bash> fdisk /dev/sda

fdisk> g
Created a new GPT disklabel (GUID: ABC02D92-4420-4998-A39B-B39257341D68).
fdisk> n
Partition number (1-128, default 1): 1
First sector (2048-500118158, default 2048): 
Last sector, +sectors or +size{K,M,G,T,P} (2048-500118158, default 500118158): +512M

Created a new partition 1 of type 'Linux filesystem' and of size 512 MiB.
fdisk> t
Selected partition 1 Hex code (type L to list all codes): 1 
Changed type of partition 'Linux filesystem' to 'EFI System'. 

fdisk> w
fdisk> q

bash> mkfs.fat -F32 -nEFI /dev/sda1
bash> mkfs.ext4 -LROOT /dev/sda2


Installation as usual, see the official Installation Guide for more information. Following are only the relevant commands:

mount /dev/sda2 /mnt/
mkdir /mnt/boot
mount /dev/sda1 /mnt/boot/
pacstrap /mnt base
genfstab -U -p /mnt >> /mnt/etc/fstab
arch-chroot /mnt

Boot config

UEFI doesn’t rely on the Master Boot Record (MBR) and it is able to read the ESP FAT filesystem autonomously, so there is no need for things like GRUB stage1/1.5 in the final setup.

The only configuration yet to do is to create a boot entry in the EFI non-volatile memory. This entry tells the UEFI system which file to load and execute from the ESP.

pacman -S efibootmgr
efibootmgr -c -l /vmlinuz-linux -u "root=/dev/sda2 initrd=/initramfs-linux.img"

Final steps

Reboot your system. You’ll find a Linux entry in the boot selection menu of your motherboard. Selecting it would boot ArchLinux. Enjoy!